Head Protection Hardhat
Personal Protective Equipment Supplier Head Protection
21st Oct 2018
PPE Safety Equipment Health and Safety Personal Protective Equipment Safety Equipment
PPE Suppliers Gauteng
21st Oct 2018

Personal Protective Equipment Supplier Footwear

Safety Shoe Supplier

LOOKING FOR PPE YOU CAME TO THE RIGHT PLACE

CONTACT US ON 0823280967

OR

EMAIL US ON info@msrm.co.za OR OUR CONTACT FORM (CLICK HERE)


PERSONAL PROTECTIVE EQUIPMENT SUPPLIER – FOOT WEAR

005

BEST PRACTICE  GUIDELINES  FOR FOOT PROTECTION

PICTURE ON FRONT REBEL SAFETY FOOT WEAR WE ARE REVIEWING


Iyou are in Health and Safety oare a Buyer you may know from experience what works or what noworks for You! Nolwazi MSRM as a Health and Safety Specialist recognize this and appreciates this fully, however we do not just supply Personal Protective Equipment. And you might be surprised  at this fact! To obtain a Quote and to add Value to your company align yourself to Nolwazi MSRM (Pty) Ltd. Why not arrange a meeting with us and test our knowledge on Health and Safety. We are friendly, straightforward and to the Point. Ours is a business that exceeds at the discerning buyer or Health and Safety official that takes it serious when it comes to “Protecting Your People”. Call us now!

According to South Africa`s own Occupational Health and Safety Act 85 of 1993, within the General Safety Regulations 3(A) PPE must be provided and it mentions only what must be provided it does not mention the type of protection! In other words there is a vacuum to guide us. Normally what happens it is up to the Health and Safety department of a company to assess and make the required recommendation towards the type of PPE that is required based upon Risk Analysis and feasibility studies. So where do we find best practice towards Personal Protective Equipment. And what is effective Foot wear? Also we will mention and refer the American Standard which is expected best practice.

1918.104(a)

The employer shall ensure that each affected employee wears protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects or objects piercing the sole.

1918.104(b)

Such equipment shall comply with American National Standards Institute, ANSI Z-41-1991, “American National Standard for Personal Protection-Protective Footwear.”

1918.104(b)(1)

The employer must ensure that protective footwear complies with any of the following consensus standards:

1918.104(b)(1)(i)

ASTM F-2412-2005, “Standard Test Methods for Foot Protection,” and ASTM F-2413-2005, “Standard Specification for Performance Requirements for Protective Footwear,” which are incorporated by reference in § 1918.3;

1918.104(b)(1)(ii)

ANSI Z41-1999, “American National Standard for Personal Protection — Protective Footwear,” which is incorporated by reference in § 1918.3; or

1918.104(b)(1)(iii)

ANSI Z41-1991, “American National Standard for Personal Protection — Protective Footwear,” which is incorporated by reference in § 1918.3.

1918.104(b)(2)

Protective footwear that the employer demonstrates is at least as effective as protective footwear that is constructed in accordance with one of the above consensus standards will be deemed to be in compliance with the requirements of this section.

What should I know about safety footwear?

If you are at risk for foot injury at your workplace, you should wear the appropriate protective footwear.

  • If foot protection is required, set up a complete foot safety protection program including selection, fit testing, training, maintenance and inspection.
  • Safety footwear is designed to protect feet against a wide variety of injuries. Impact, compression, and puncture are the most common types of foot injury.
  • Choose footwear according to the hazard. Refer to CSA Standard Z195-14 “Protective Footwear”.
  • Select CSA-certified footwear. Ensure that it has the proper rating for the hazard and the proper sole for the working conditions.
  • Use metatarsal protection (top of the foot between the toes and ankle) where there is a potential for injury.

How is footwear selected?

Footwear must be chosen based on the hazards that are present. Assess the workplace and work activities for:

  • Materials handled or used by the worker.
  • Risk of objects falling onto or striking the feet.
  • Any material or equipment that might roll over the feet.
  • Any sharp or pointed objects that might cut the top of the feet.
  • Objects that may penetrate the bottom or side of the foot.
  • Possible exposure to corrosive or irritating substances.
  • Possible explosive atmospheres including the risk of static electrical discharges .
  • Risk of damage to sensitive electronic components or equipment due to the discharge of static electricity.
  • Risk of coming into contact with energized conductors of low to moderate voltage (e.g., 220 volts or less).
  • Type of walking surface and environmental conditions workers may be exposed to (e.g., loose ground cover, smooth surfaces, temperature, wet/oily, chemicals, etc.).

Also, evaluate the risk:

  • to ankles from uneven walking surfaces or rough terrain
  • of foot injury due to exposure to extreme hot or cold
  • of slips and falls on slippery walking surfaces
  • of exposure to water or other liquids that may penetrate the footwear causing damage to the foot and the footwear
  • of exposure to rotating or abrasive machinery (e.g., chainsaws or grinders)

What should I know about the fit and care of safety footwear?

Fit:

  • Try on new boots around midday. Feet normally swell during the day.
  • Walk in new footwear to ensure it is comfortable.
  • Boots should have ample toe room (toes should be about 12.5 mm from the front). Do not expect footwear to stretch with wear.
  • Make allowances for extra socks or special arch supports when buying boots. Try on your new boots with the supports or socks you usually wear at work. Check with the manufacturer if adding inserts affects your level of protection.
  • Boots should fit snugly around the heel and ankle when laced.
  • Lace up boots fully. High-cut boots provide support against ankle injury.

Care:

  • Use a protective coating to make footwear water-resistant.
  • Inspect footwear regularly for damage (e.g., cracks in soles, breaks in leather, or exposed toe caps).
  • Repair or replace worn or defective footwear.
  • Electric shock resistance of footwear is greatly reduced by wet conditions and with wear.
  • Footwear exposed to sole penetration or impact may not have visible signs of damage. Replacing footwear after an event is advisable.

What symbols will be on the footwear?

The following symbols, or markings, will help you determine which footwear is appropriate for the job.

Selection of Safety Footwear
Marking Criteria Intended Application
Green triangle Green triangle indicates sole puncture protection with a Grade 1 protective toecap. For heavy industrial work environments, especially that of construction where sharp objects (such as nails) are present.
Yellow triangle Yellow triangle indicates sole puncture protection with a Grade 2 protective toecap. For light industrial work environments requiring puncture protection as well as toe protection.
Blue triangle Blue rectangle indicates a Grade 1 protective toecap with no puncture-resistant sole. For industrial work environments not requiring puncture protection.
Grey rectangle Grey rectangle indicates a Grade 2 protective toecap with no puncture-resistant sole. For industrial and non-industrial work environments not requiring puncture protection.
White rectangle with orange Greek letter omega White rectangle with orange Greek letter omega indicates electric-shock protective footwear. For industrial work environments where accidental contact with live electoral conductors can occur. Warning: Electrical shock resistance deteriorates with wear and in a wet environment.
Yellow rectangle with SD letters Yellow rectangle with black SD letters indicates static-dissipative footwear. For industrial work environments where a static discharge can create a hazard for workers or equipment. Warning: This footwear should not be used where contact with live electrical conductors can occur.
Yellow rectangle Yellow rectangle indicates sole puncture protection with a Grade 2 protective toecap. (super-static dissipative footwear) For industrial work environments where a static discharge can create a hazard for workers or equipment. Warning: This footwear should not be used where contact with live electrical conductors can occur.
Red rectangle Red rectangle with white C letter indicates electrically conductive footwear. For industrial work environments where low-power electrical changes can create a hazard for workers or equipment. Warning: This footwear should not be used where contact with live electrical conductors can occur.
Dark grey rectangle Dark grey rectangle with M letter indicates metatarsal protection. Note: Toe protection is required for all metatarsal protective footwear. For industrial work environments where heavy objects can hurt the metatarsal region of the foot.
White label with green fir tree White label with green fir tree symbol footwear provides protection when using chainsaws. For forestry workers and others who work with or around hand-held chainsaws and other cutting tools.

NOTE:  Footwear will also be marked to indicate the level of slip resistance.  These markings may be on the packaging, the footwear, or on a product sheet.

See our Next PPE Publication after this one or Click Here


Personal Protective Equipment

We proudly service the Following Areas

South Africa – Limpopo | North West | Gauteng | Mpumalanga | Northern Cape | KwaZulu Natal | Western Cape | Eastern Cape | Freestate

 

OBTAIN A QUOTE